CUAV CAN PMU Power Detection Module – UAV/FC AutoPilot

The CUAV CAN PMU is a drone power management unit with a built-in STM32F4 processor and running the CUAV ITT algorithm. It can accurately measure the drone voltage and current in real time. The PMU supports a maximum of 6-62V voltage and 110A current and can output 5.4V 5A (maximum instantaneous 8A / 120s, constant 5A). This unit powers the flight controller, uses CAN bus communication, supports standard UAV CAN protocol, and each PMU unit is factory calibrated to ensure good consistency and high accuracy.

VIDEO: Changing battery empty voltage parameters on CUAV CAN PMU

• Maximum support with 62V voltage input
• Supports standard UAV CAN protocol
• High oerecision power detection unit
• 0.05V 0.1A Measurement accuracy
• 5v/5A stable voltage output
• Built-in STM32F4 Processor
• Factory callibrated

• Calibration settings: Factory calibration, no user calibration
• IN/OUT: XT90 (cable end) / Amass 8.0 (module end)
• Processor: STM32F412 100Mhz 512K Flash 256K RAM
• Operating temperature:-20℃ ~ +100℃
• Max stable output power: 5000W
• Max output power: 6000W / 90S
• Voltage input : 6-62V (2-15S)
• Power port output: 5.4V / 5A
• Firmware upgrade: support
• Voltage accuracy: ± 0.05V
• Current accuracy: ± 0.1A
• Size: 46.5×38.5×22.5mm
• Resolution 0.01A / V
• Power: 5025850670
• Max current: 110A
• Protocol: UAVCAN
• CAN: GHR-04V-S
• Interface type
• Weight: 76g

• CUAV CAN PMU Manual Download

• 1x CUAV CAN PMU Module
• 1x X7 Series Power Cable
• 1x V5 Series Power Cable