RekonFPV Rekon 3 Nano Long Range FPV Quad

Please note, though this is a BNF with ELRS build from HGLRC, it has been assembled by drkstore.
Please note: The product specifications change from time to time. AIO, Motors and the VTX has been changed.

The Rekon FPV made Rekon 3 Nano FPV quad is all about simplicity and convenience! This tiny quad is designed around a single, standard 18650 Lithium-Ion cell. You insert the battery just like you would in a TV remote and immediately you are ready to fly for over 15 minutes. This means you can fit enough batteries to fly for several hours in your pocket! The Rekon3 is also extremely quiet and small; Perfect for flying in your back yard or a public park without bothering anyone, exploring an epic mountain landscape or simply cruising along wherever you want.

But despite its small size and simplicity, do not underestimate the Rekon3: The cruising speed is higher than you probably expect and since it is equipped with a powerful 400mW VTX the Rekon3 has several kilometres of video signal range.

Notes:

1. Battery type and condition, as well as environmental temperature, can affect the performance of the quad, high c-rated cell is required, we recommend Sony VTC6 or similar.

2. When the power of the battery cannot fulfill the working requirements of the ESC or VTX, it may stop working. Long periods of full-throttle flight should be avoided. Try to lower your throttle if your VTX blacks out. We recommend stopping flying at 2.8-3.2V.

3. Please try not to drain the battery out to avoid accidents when flying. Any crashes caused by the low voltage of the batteries are not related to the quality of the product.

Drone parameters:
Frame: Rekon3 Long Range Frame
Flight controller: SPECTER 10A AIO MCU: STM32F411 GYRO: ICM42688
Built-in receiver: SPI ExpressLRS2.4G
Built-in image transmission:0-RCE-25-100-400mW (adjustable)
Onboard ESC: continuous current: 10A peak current: 13A (10s)
ESC protocol: Dshot600, Oneshot, Multishot;
ESC firmware: Z_H_30/(Bluejay)
Flight control firmware: HGLRCF411SX1280 V2
Flight control input voltage: 1SS 3.7v-4.2v (Lipo)
Mounting hole: 25.5X25.5mm.M2
Motor: SPECTER 1202.5-11000kv motor
Propeller: Gemfan 3018 two-blade propeller
Optional receiver version: SPI ELRS 2.4G/TBS Nano RX
Weight: 57.87g (Weight without receiver)

Shipping list:
1x Rekon3 Long Range Drones
8x GEMFAN 3018 3-inch 2-blades propeller
1x Screw Kit

Recommended battery:
1S:18650-3000mA

Check out other FPV quads from our hanger at drkstore.in!

Learn more about this product from Rekon FPV

Check out Oscar Liangs review on this tiny FPV drone!