ZeroDrag Warp F7 w/ ICM42688P Gyro

Product Description

The ZERODRAG WARP F7 is a cutting-edge flight controller designed for UAVs. It offers advanced capabilities with robust performance powered by the STM32F722 microcontroller, dual gyro/IMU options (ICM42688P and MPU6000), and an integrated BMP280 barometer. The controller supports a wide range of power inputs (3-6S LiPo) and features a compact form factor (37mm x 38.5mm x 7.1mm), making it an ideal choice for high-precision flight operations.

Enhanced with an AT7456E OSD chip, 32MB BlackBox-Flash for flight data logging, and multiple BEC outputs, the ZERODRAG WARP F7 ensures comprehensive functionality for various UAV applications. Its connectivity options include six UARTs, multiple ESC signal pads, and I2C pads for additional sensors. The flight controller is optimized for Betaflight firmware and compatible with iNav, providing seamless integration and easy configuration for all your UAV needs.

Specification

ZERODRAG WARP F7 Flight Controller

• Product Name: ZERODRAG WARP F7
• Power Input: 3-6S LiPo
• Mounting: 30.5 x 30.5mm (4mm hole size)
• Dimension: 37 x 38.5 x 7.1 mm
• Weight: 9.35g
• MCU: STM32F722
• GYRO (IMU): ICM42688P / MPU6000
• Barometer: BMP280
• OSD Chip: AT7456E
• USB Port: Type-C
• BlackBox-Flash: 32MB
• Camera Control: Pad
• 5V Bec: 3 Amp
• 10V Bec: 2.5 Amp
• 3.3V Regulator: 500 mA
• USB 4.5V: Receiver and GPS module
• ESC Signal Pads: M1 – M6 on top side and M7-M8 as T6 & R6
• UARTs: 6 UARTs with 6 motor pads / 5 UARTs with 8 motor pads
• I2C Pads: SDA & SCL Pads for sensors like Magnetometer, Sonar, etc.
• Buzzer: Used for 5V Buzzer
• 5 x LED Pad: Supported by Betaflight firmware
• RSSI: RSI on the pad
• Supported Firmware: Betaflight and iNav
• Target Name: ZeroDrag WARP F7
• BOOT Button: Press boot button, then power FC to activate DFU mode for flashing.
• Connector: BetaFlight Standard0

Features

1. 1.   High-Performance STM32 F7 Processor
   2.   GPS support for Rescue mode (Betaflight)
   3.   GPS support for Loiter/autonomous missions (iNav)
   4.   Built-in Analog OSD (MAX7456E)
   5.   Up to 6 UART Ports
   6.   Supports Up to 8 Motor Outputs
   7.   Gyro sampling rate (8KHZ)
   8.   Compact, sleek, Lightweight Design for lowrider builds
   9.   2 Gyro/IMU Options (mpu6000 /icm42688p)
   10.   Dedicated power supply for clean IMU power rail
   11.   Integrated Barometer BMP280
   12.   Integrated 32MB BlackBox-Flash for logging
   13.   Wide Power Input Range (3-6S LiPo)
   14.   Betaflight and iNav Support
   15.   USB Type-C Port with solder pads for hard-to-reach builds
   16.   Camera Control Pad for analog camera setup
   17.   5V and 10V BEC Outputs
   18.   I2C Pads for Additional Sensors
   19.   LED and Buzzer Support
   20.   RSSI Pad
   21.   Betaflight Standard Connector
   22.   DFU Mode Activation via BOOT Button
   23.   True Pit Mode
       
       
       

Manual for ZeroDrag Warp F7

Contents

1x Flight Controller
1x Set of Grommet Gummies
1x Set of Cables
1x Set of Spare Connectors